 |
 |
|
|
|
| |||
| Your position: Triluxchina-->Products-->HCD54 | |||
|
Tapered Equipment Thread Equipment Coupling sleeves Integral drill steels | |||
|
HCD54 |
Hammer Length without bit(mm) | :1220 | |
| API thread | :2&3/8 3&1/2 API REG | ||
| Outside Diameter(mm) | :122 | ||
| wrench flato(mm) | :75 | ||
| weight(kg) | :91 | ||
| Work pressure(bar) | :6-25 | ||
| Air consumption L/S blankchoke | 10bars-105L/S 18bars-185L/S 24bars-205L/S | ||
 |
Replacement Parts |
Weight(kg) | Part NO. |
| 1,Top Subs:2&3/8 API REG | 11.2 | HCD54-01 | |
| 3&1/2 API REG | 11.7 | HCD54-01A | |
| 2,O-ring | 0.01 | HCD54-02 | |
| 3,Valve Seal | 0.02 | HCD54-03 | |
| 4,Check Valve Dart | 0.2 | HCD54-04 | |
| 5,Check Valve Dart Spring | 0.05 | HCD54-05 | |
| 6,Shim | 0.1 | HCD54-06 | |
| 7,Compression ring | 0.1 | HCD54-07 | |
| 8,Cover | 0.15 | --- | |
| 9,Rigid Vaives | 4 | HCD54-09 | |
| 10,Internal Cylinder | 6 | HCD54-10 | |
| 11,Piston | 16.2 | HCD54-11 | |
| 12,Piston Case | 34 | HCD54-12 | |
| 13,Guide Sleeve | --- | --- | |
| 14,O-ring | --- | --- | |
| 15,O-ring | 0.01 | HCD54-15 | |
| 16,Bit Retainer Ring | 0.35 | HCD54-16 | |
| 17,Driver Sub | 6.5 | HCD54-17 | |
| 18,Foot Valve | 0.07 | HCD54-18 | |
| 19,Bit | 16.5 | ZT54**** | |
| HCD54 I-R DHD350A Dh5 Atlas Copco COP54 Digger5 Secoroc54 Compair Holman Vol500 |
Button No.XSize | Dia(mm) | Weight (kg) | Part No. | |
 |
Flat(A) | 8XΦ16 7XΦ14 | 140 | 16.5 | ZT54140A |
| 8XΦ16 8XΦ14 | 148 | 17 | ZT54148A | ||
| 8XΦ16 9XΦ14 | 152 | 17.36 | ZT54152A | ||
| 7XΦ18 8XΦ14 | 140 | 16.8 | ZT54140AHD | ||
| 7XΦ18 8XΦ14 | 148 | 17.2 | ZT54148AHD | ||
 |
Concave(B) | 8XΦ16 7XΦ14 | 140 | 16 | ZT54140B |
| 8XΦ16 8XΦ14 | 148 | 16.5 | ZT54148B | ||
| 8XΦ16 9XΦ14 | 152 | 17.3 | ZT54152B | ||
| 7XΦ18 7XΦ14 | 140 | 16.2 | ZT54140BHD | ||
| 7XΦ18 8XΦ14 | 148 | 16.8 | ZT54148BHD | ||
 |
Convex(C) | 8XΦ16 6XΦ14 | 134 | 14.5 | ZT54134C |
| 8XΦ16 7XΦ14 | 140 | 16 | ZT54140C | ||
| 8XΦ16 8XΦ14 | 148 | 16.5 | ZT54148C | ||
|
|
|
HOME ||||||||||||||| ORDER ||||||||||||||| CONTACT US |
